This week at ECI we delivered 3 tools for the verification and calibration of one part of the fuselage of a commercial aircraft. Each of the 3 items will be used to calibrate 3 types of frames fitted to the A321 model.
The 3 tools are made of different materials: carbon steels S355J2 and S355K2G3 for the main structure, stainless steels A2 and C4-70 for guides and mechanisms, and aluminium AW-6082/T6-T651 for the parts in contact with the gauge used in the verification process.
It was a highly demanding job in which we carried out all the required processes. These include manufacturing the different structures, welding, stress relieving, machining, pre-assembly, painting, oven drying, final assembly, verification and tests with the client.
All the processes were strictly controlled, both the welds (with their respective approvals) and the non-destructive testing by ultrasound and magnetic particles. Dimensional checks were also carried out with a 3D Tracker, and the painting process was monitored to a C5 requirement.
The result was satisfactory for the client and for our whole team, who took part in every phase and of whom we are very proud.



