At Talleres ECI we have presented an innovative project that is very well suited to the pandemic times we are living through worldwide. It is a machine that cleans and disinfects hospital beds using an automated system with a robot.
The process is divided into 5 phases:
Phase 1 (entry)
The bed is placed on the entry ramp between the initial positioning guides. At this point, a fixed actuator in the floor that works as a sensor detects that a bed is waiting to be washed and the process starts automatically.
Phase 2 (washing)
Once the bed has entered module 1, the door closes and washing begins using a rotating base and a robotic arm.
Phase 3 (disinfection)
Two doors close, creating a completely sealed chamber. High-temperature steam is introduced and then extracted to prevent particles from condensing on the bed. When disinfection is finished, the doors open again, producing a pressure change that speeds up drying.
Phase 4 (drying)
The bed enters the last module, where a controlled channel of hot air is continuously projected onto it, so that the whole structure dries in a very short time.
Phase 5 (exit)
The bed leaves the last module through an exit ramp similar to the entry one, where a sensor detects that the bed has left and allows the next bed to enter.
The robot to be used in the process has two functions: the first is washing and disinfection with dry steam; the second is projecting pressurised water to remove the elements that are hardest to wash off.
The structure is divided into 3 large modules which, through a closed and channelled cycle, reuse the water for the whole process. This reduces the environmental impact of the process and cuts costs for the hospital.
